Wednesday Lunchtime Net Digital Modes

Update: KB7KBH reports response has been weak, and he also finds himself busier than expected, so the digital focus on Wednesdays has been suspended. Plenty of good information below, however, and a future event or discussion is always possible.

Greetings all. Michael W7ALX wanted me to do the Wednesday Lunchtime Net to see if there was any interest in folks wanting to expand their knowledge in Digital, and Satellite Opps. I am by no means an expert, but I’m willing to assist those that are interested. We will have the normal net, then after check-ins we can discuss the digital and Sat stuff.

Here are some examples of radio setup for digital modes.

Kenwood radio link 590G

https://www.kenwood.com/i/products/info/amateur/ts_590g/pdf/ts590_g_ft8_settings_en.pdf

Yaesu

Icom

Most of the newer Icom radios have a built-in sound card. Other brands may need a SignalLink USB modem.

There are a lot of YouTube videos that will help guide you thru installation and setup for your brand radio.

The WJST-X free software is what most folks use. They have it for Windows, Mac, and Linux.

https://wsjt.sourceforge.io/wsjtx.html. Com ports are the biggest issues some folks have, Me included!

VARA HF is very similar to FT-8 and some of the settings are similar. It again depends on the brand of HF radio you have. I did a lot of trial and error until I got it. YouTube videos are helpful in setup.

Satellite Comminutions

Satellite comminutions can be a challenge. There are a few in the club that work the birds with a HT or two, and a handheld dual band Yagi antenna. You can find tracking software for your cell phones to help with that. Most of the Sats uplink on 2M, and downlink on 440, depends on the satellite. There are Linear sat’s that are SSB, in that case you would need a radio capable of 2M and 440 SSB. The challenge is the Doppler shift. I have a unit called S.A.T from CSN Technologies. It is a standalone unit that can be used on your cell phone (no computer necessary.  It will control the antennas, frequency’s and doppler shift. I have the Yaesu G5500 rotor for azimuth and elevation antenna control.

Anybody interested can come over to my QTH, and see how it works.

Don Hopkins

KB7KUH

Leave a Reply